Minerals, additives and lining products for civil engineering

CEBOGEL^® CSR is a sodium-activated Bentonite. The product has a high water absorption capacity, making CEBOGEL CSR very effective in several civil technical applications.

Download

CEBOGEL® Trenchcontrol is a superior-performance, sodium activated Bentonite, characterized by its ability to rapidly seal trench walls. The product has an impressive low filtrate loss and is therefore used efficiently in sandy soil formations.

Download

Cebo Hybrid-Gel is a high-yield biodegradable fluid system, based on natural, non-toxic polymers, and is defined as our staple environmentally friendly drilling product. It has a relatively low mixing ratio and is ideal for all small-scale Core Drilling operations. 
 
Cebo Hybrid-Gel is extremely versatile; it can be used as a single-sack solution to build viscosity and improve fluid loss, or alternatively used in addition to a polymer-based drilling fluid to stabilize and enhance existing properties. 
 
Cebo Hybrid-Gel is an efficient clay and shale inhibitor and promotes effective solids suspension and transportation. Cebo Hybrid-Gel can be mixed in fresh, brackish, or saturated salt water.

Download

CEBOGEL® QSE-400 composes granulated, sodium-activated Bentonite and is ideal for use in a range of Civil Engineering applications.

The product can be used to control downhole pressure and prevents groundwater from rising to the surface.

CEBOGEL QSE-400 is stable when mixed with a Bentonite fluid and can be done so to delay the swelling of individual granules.

Download

CEBOGEL® CE is a high quality sodium-activated Bentonite. The product's high water absorption capacity makes CEBOGEL CE very effective in landfill sealing technologies.

CEBOGEL CE complies with CUR 33 recommendations that set requirements for Bentonite enhanced soils. 

Download

Cebo D-FLOC is used as a dispersant and deflocculant in Civil Engineering applications. The product is an additive for Bentonite-based drilling fluids and can effectively reduce viscosity and gel strength, increasing flowability of water/Bentonite suspensions.

Cebo D-FLOC is a rapid-action dispersant for Bentonite/Cement slurries, significantly improving workability and filtration control. The product is highly concentrated with a subsequent low mixing ratio; Cebo D-FLOC is therefore a cost-effective deflocculant solution for Diaphragm & Slurry Wall operations. 

Download

Sodium Bicarbonate (NaHCO₃) is a white crystalline powder, used as an additive to precipitate Calcium.

The product is commonly introduced to Diaphragm & Slurry Wall operations after cementing or when cement contamination occurs, where it will effectively decrease pH and Calcium ions content.

Download

CEBOGEL® GCL is a specially designed sodium-activated Bentonite.

Due to CEBOGEL GCL's high water absorption capacity, the product effectively binds water and creates a very low permeability.

Download

CEBOGEL® CE is a high quality sodium-activated Bentonite. The product's high water absorption capacity makes CEBOGEL CE very effective in landfill sealing technologies.

CEBOGEL CE complies with CUR 33 recommendations that set requirements for Bentonite enhanced soils. 

Download

CEBOGEL® Sealfix is a specially-selected sodium Bentonite, defined by its impressive water absorption properties. The product comprises a sand/Bentonite mix, capable of binding water and creating a very low permeability.

Download

CEBOGEL® QSE composes cylindrical pressed Bentonite rods made from 100% sodium-activated Bentonite and is characterized by its impressive water absorption capacity.

In Vertical Drilling operations, the product is used to restore drilled clay layers. A key feature of CEBOGEL QSE is its ability to rapidly swell when in contact with water; this enables the product to form a clay plug in the entry or exit pit, resulting in fast and efficient sealing. CEBOGEL QSE is versatile and works effectively in slightly brackish water.

Download

CEBOGEL® QSE-400 composes granulated, sodium-activated Bentonite and is ideal for use in a range of Civil Engineering applications.

The product can be used to control downhole pressure and prevents groundwater from rising to the surface.

CEBOGEL QSE-400 is stable when mixed with a Bentonite fluid and can be done so to delay the swelling of individual granules.

Download

Cebo QSL composes cylindrical rods made from 100% natural clay. Cebo QSL has a low water absorption capacity and therefore swelling is minimal and delayed when contact with water is made.

The product is used in dam and dyke construction and restoration as a waterproofing solution, lowering water permeability and aiding repair work by creating a high quality seal.

Download

CEBOGEL^® S-1202 is a sodium-activated, granular Bentonite and is defined by its impressive absorption capacity. CEBOGEL^® S-1202 has outstanding binding properties and is therefore ideal for use in waste water treatment operations and environmental uses such as soil sealing.

Download